SpanishPortugueseFrenchItalianGermanRussianArabicChinese (Simplified)English

1998 Porsche Spec Boxster (For Sale)

For sale: $45,000

This is Spec Boxster build #003 by TuneRS Motorsports. The car was completed in early 2013. The tub started as a clean, straight, non-accident vehicle which was the perfect candidate. It is painted guards red with yellow accents. The car is currently for sale through TuneRS for the current owner of the vehicle. It has been campaigned in the Southeast U.S.A. only at tracks such as Road Atlanta, Sebring, Daytona, PBIR and Homstead. It has competed twice in the Sebring 48 Hours club race, FARA sprint racing and other local club & HPDE events.

Each one of our TuneRS Spec Boxsters is built to compete while staying strict to the rules set forth for Spec Boxster. All Spec Boxster’s built by our team here at TuneRS are race ready from the day you receive it and are built to handle sprint racing to endurance racing. What sets our Spec Boxsters apart from other SPB builders? Our attention to detail the team puts in to each and every vehicle build. Below you will find the specifications this Spec Boxster received when it was built. Quality is key when building a racing vehicle or any vehicle and knowing that our Spec Boxsters will compete with the best and endure hours and hours of racing is what helps set us apart from the rest. These Boxsters are not put together overnight; they are assembled over a several month period with different phases through the build to ensure no corners are cut and that you, the client, are receiving the best of the best. Every part that is installed is factory new; no used or remanufactured components are ever placed into our Spec Boxster builds. This backs up our “new, zero mile” claim on the components installed. Even the vehicles we choose to have the Spec Boxster race conversion performed are chosen under strict guidelines which include zero accidents and straight tubs.

Specifications:
ENGINE & TRANSMISSION:
– 2.5L engine rebuild done in 2013, including Direct Oil Feed (DOF) with new IMS bearing at the time. Currently has xxx track miles since completion.
– Custom 2″ straight through SS exhaust with stock exhaust manifolds
– Drop in K&N high flow air filter with stock air box
– TRS 4″ under drive pulley with a/c delete
– Sachs performance clutch kit
– AASCO Lightweight Flywheel
– Semi-solid engine mounts
– TRS 2 quart deep sump oil pan kit

SUSPENSION & STEERING:
– Bilstein PSS9 coil over shocks with Swift race springs (450lb/500lb rated)
– GT3 front sway bar, 5 point adjustable
– Tarett rear 4 point adjustable sway bar with Tarett drop links
– GT3 lower control arms front & rear
– New stock front strut mounts/bearings (in 2013)
– New stock rear strut mounts (in 2013)
– TRS rear adjustable toe control arms

EXTERIOR:
– Lightweight TRS fiberglass roof panel with dzus quick release fittings and lexan rear glass
– Rear spoiler mounted in upright position
– GT3 cup front lip spoiler
– Standard headlamp assemblies
– TRS undercarriage tie downs front / rear
– 17″ twist wheels, square setup (17×8.5 front / 17×8.5 rear)
– Toyo RR 255/40/17 tires mounted
– Aerocatch quick release panel system front / rear
– Boxster S front bumper

INTERIOR & SAFETY:
– 6 point weld in roll cage, FIA approved design, 1.75″x.095″ chromoly tubing, tig welded for superior strength and rigidity
– Complete A/C removal and electronics removal
– MOMO Quick release wheel adapter
– MOMO Suede steering wheel w/flat bottom
– MOMO Daytona FIA racing seat
– Reinforcement backing plates under seat slider
– Reinforcements for seat harness supports
– Driver side window safety net
– Center window safety net
– Safecraft 5lb manual dual pull extinguisher system
– 6 pole kill switch, dual pull
– Start/Stop panel with master kill switch, 2 switch system for accusump & trans cooler
– Numeric racing short shift assembly with Numeric Racing shift cables
– TRS shift cable security clips
– TRS shift base raise kit

BRAKES:
– ATE slotted front & rear rotors
– PAGID Yellow brake pads front / rear
– TRS braided brake lines
– System flushed & filled with Castrol SRF racing brake fluid
– TRS front brake air deflectors

ADDITIONAL COOLERS:
– Accusump 3 quart “bazooka” system with external oil cooler and TRS heat exchanger delete
– TRS transmission oil cooler kit
– TRS power steering oil cooler kit
– Additional third coolant radiator in front center

WEIGHT:
– 2439 lbs, with 4 gallons of fuel in tank

Call Now Button